File this project under the category of "more work than I ever anticipated"...
For whatever reason, I like white race cars. Makes it real easy to see sponsor logos (why I care about that on my unsponsored car I have no idea...) and to see if you have any oil leaks or other maladies. My car is white as you can tell from the pic. I'm also a big fan of blue and red stripes on white cars. Like the Racing Beat Miata and the Brumos Porsches. So I figured I'd add some red and blue stripes and be semi patriotic for the next race - Memorial Day weekend at Laguna Seca. Laguna Seca baby! Like the Vegas for car guys. This is what the Racing Beat Miata looks like.
I wanted to do something similar to my car.
"It's just some stickers. Should take me 15 minutes to do this." is what I was thinking Saturday morning while hanging out at the pool with the wife. So once I got bored sitting around, I went to TAP Plastics to see if they had any vinyl since they seem to have lots of other big boy toys.
I bought a few feet of blue and red vinyl sheet and came home thinking I'd install it on Sunday while the wife was working. The local Bay Area Miata Driver's club had done a write up on installing vinyl stripes on a Miata. How hard could it be? Yeah, right...
I managed to cut the stripes in the pattern I wanted without too much issue. Then I tried to peel and stick. That is when the annoying part started... I got many many air bubbles when I tried to stick the stripes to the hood. I pulled and re-attached the vinyl a few times and screwed up the vinyl a bit. After spending more time popping the bubbles trying to make it look less amateurish, I gave up and stopped at the hood. I was going to stripe the top and the trunk but I'm out of time. Good enough for a home built Spec Miata. :)
I also spent some time putting on the Toyo Tires stickers and AIM Tire stickers. AIM had given me a great deal and great service on Team Dynamic wheels and Toyo RA1 tires shaved to 6/32" so I'll happily run their stickers on my car. They also provide track side service so its good to support a local company.
Anyway, some before/after pics for your viewing pleasure.
Check out my custom touches on the Toyo Tires sticker. I cut each letter individually and placed it on the wheel well so it followed the contour. Pretty cool I think. :)
Now I just need to get my Race Technology DL1 lap timer / data acquisition system working. I bought it used and am still trying to figure it out....